Request a Quote


Location: Marathon, FL, US

2005 Beneteau Oceanis 373

Single owner, well cared for, nicely equipped, shoal draft cruising sailboat.

This Oceanis 373 shows very well, with deck and hull in gelcoat in good shape.

Comfortable cockpit with full sun cover (dodger, bimini, and connector), nice teak accents, walkthough transom and articulating wheel that stores to the side. All lines for the in-mast furling main and furling genoa led aft for ease of handling at safety at sea. Both sails in good shape along with Asym Spinnaker. Nice wide decks for going forward with plenty of sturdy handholds. No leaks apparent below, all acrylic in good shape as is interior cabinetry. 2 Stateroom layout with single head with shower. Large dinette converts into bunk, bench settee opposite which can be used as another bunk. The boat carries plenty of canvas to move her along in light air, while the furling gear makes reefing a simple and quick. The 40hp yanmar diesel will move the boat at 8kts, while her 4’3” draft will let her sneak into those shallow uncrowded anchorages. Equipped with Fischer Panda 4.3KW Genset! She has the shoal keel that only draws 4'3"!


North Sails Furling Main, Genoa and Spinnaker


40hp Yanmar


Raymarine Radar

Raymarine GPS C80

Raymarine Wind

Raymarine Depth



Propane Stove with oven



Coffee Maker


32” Flatscreen HDTV

CD Player with interior and cockpit speakers


Full canvas enclosure / Winter Cover with frames.

Sail Area
I : 44.72 ft
J : 13.91 ft
P : 41.01 ft
E : 14.44 ft
Working Sail Area : 721.94 sq ft Manufacturer Provided Description The designers have managed to blend volume, comfort, high performance and elegance. The slender hull, well-balanced sail plan and the standard deep keel, enhance upwind performance, give directional stability and helm balance when heeled. The new split-level deck layout of the Oc??anis 373 combines greater headroom with fluid aesthetics. The cockpit is very spacious and ergonomic. The cunningly designed removable helmsman's seat simplifies access to the bathing platform, whilst the removable door step makes the companionway very practical. Unrivalled circulation is possible thanks to the brand-new,patented, steering wheel, which can be swiveled out of the way to clear the cockpit, still leaving all the instruments on the helm pedestal. Additional Description - PERFORMANCE Pack (optional) - ? Fully battened performance mainsail with roller cars. ? Belly compensating jib (foam layer to middle of luff allowing the jib to furl better, and giving the jib a flatter belly when partially furled). Anti-UV strip to jib. ? Low stretch halyards. ? H43.2STC genoa sheet winches in place of H44.2STC winches. ? Folding 3-blade propeller. - NAV PACK (optional): Nav Pack n?3 - ? In the cockpit: ST60 Wind instrument linked to masthead windvane anemometer, with cable and junction box at foot of mast. Raymarine ST 60 Tridata instrument (log, speed and depth sounder, with transducers). Raymarine ST6001 autopilot (controller, computer, helm drive and cable). ? On steering console in cockpit: Raymarine C70 LCD GPS chart plotter with colour 6.5? screen and Navionics Gold cartography. - Exclusive PACK (optional) - ? Nav Pack n?3. ? Large sprayhood in ?Captain blue? with 2 stainless steel frames, or bimini. ? H40.2STC winch to port in place of H32.2STC winch. ? Hot and cold cockpit shower. ? Waterproof speakers in cockpit. ? GRP cockpit table. Additional Description ? Pivoting helm seat allows easy access to bathing platform. (B?n?teau patent.) ? 2 side cockpit lockers fitted with wood shelves (for liferaft stowage). ? 2 aft cockpit lockers. ? 1 separate, watertight gas locker. ? 2 teak-slatted helm benches at each side of cockpit. ? All cockpit benches are teak-slatted. ? A steering wheel console takes navigation instruments. (The instruments are an option.) ? Steering compass on console. ? Control lever to starboard cockpit coaming. ? 12V cigarette lighter socket on console. ? Handrail. ? Cup holder. ? Folding varnished wood cockpit table fixed to steering console. ? Manual bilge pump. Additional Description 2 and 3 cabin options available. Additional Description Electrical panel: ? 12-switch 12V electrical panel plus 3 x 220V switches. ? Cigarette lighter socket. ? Double protection to electrical panel, differential circuit breaker and bi-polar temperature magneto for 220V circuit and 12V magneto temperature circuit breaker. Supply: The 12V electrical circuit is supplied by: ? One 110 Amp service battery. ? One 70 Amp engine battery. Resource management indicators: ? Voltmeter. ? Battery charge warning light. Battery charging: ? Battery charging by engine alternator or 220V ? 20 Amp shore supply. Lights: ? Approved navigation lights. ? Bow and stern navigation lights. ? Steaming light (masthead light). ? Anchor light. Additional Description ? Headroom: 1.98m. ? A functional space: ? Laminated work surface with moulded wood fiddle. ? Stainless steel double sink. ? Mixer tap with hot and cold pressurised water. ? Chopping board. ? Gimballed gas two-burner hob and oven with protective stainless steel safety rail. ? 110L top opening, foam insulated icebox, with plastic baskets. ? Second front opening, foam insulated icebox (70L), fitted with refrigerating plate, baskets and shelves (only available with 2-cabin layout). ? Seawater foot pump and icebox drainage. ? 220 V socket. ? Ample stowage: - Stowage with hinged doors under hob. - Cutlery drawer. - 4 storage shelves with doors along the hull. - Stowage under sink. - Waste bin under sink. ? Neon light over hob. ? 2 deckhead lights: 1 over sink and 1 over hob. ? T4 opening port with curtains over hob for good ventilation. ? 8 place settings. Additional Description ? Engine compartment with foam sound-proofing. ? Engine control panel with rev counter and alarms to starboard cockpit coaming. ? Stainless steel propeller shaft with GRP protection moulded into the hull. ? Fixed two- or three- blade propeller according to engine. ? Engine mounting built into the inner mould. ? Rotomoulded 115L diesel tank aft, fitted with electronic gauge. ? Saltwater and diesel filters with sediment reservoirs. Additional Description The hull is single-skinned GRP construction. Reinforced points (keel, rudder, chain plates, hull-deck joint) help to strengthen the structure. A structural inner moulding is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (shroud chainplate tie rods, keel, rudder, etc.), and spreads any loads guaranteeing reduced strain on the hull. The surface material of the inner moulding makes cleaning easier and provides a better finish. The standard hull colour is white with blue and gold decoration. Steel Blue is available as an option. Additional Description The deck is sandwich construction (glass fibre and balsa) for an optimal strength/weight ratio and excellent thermal and sound insulation. A ?diamond point? non-slip surface increases safety over all areas of movement on deck. - MOORING AND ANCHORING - ? Stainless steel bow fitting with offset roller to allow anchor stowage under way. ? 2 roller fairleads amidships. ? 2 roller fairleads and 2 x 300mm aluminium mooring cleats at the stern and 2 x 300mm aluminium mooring cleats at the bow. ? Main anchoring kit with 16 kg anchor, 20m chain and 38m warp. (4 mooring lines and 6 white fenders). ? Vertical 800watt 12V electric windlass, with watertight relay casing, with on-deck up and down control switches for easy anchoring. ? Self-draining anchor well with clinch fitting. - BATHING PLATFORM AND TRANSOM - ? Transom with teak covered bathing platform. ? Stainless steel bathing ladder with teak treads. ? Outboard motor bracket. ? Protective rubber rubbing strake to transom. ? Cold water cockpit shower. Additional Description CE Certification: A8/B8/C12 (pending ratification) Disclaimer The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


Model Year
Oceanis Clipper 373


Length (feet)
Length Overall
36.92 feet
12.25 feet
4.25 feet
14550.49 pound
56 feet


Hull Type
Hull Material


Engine Type
Engine Model
50.0 hp
Fuel Type
Fuel Tank Capacity
50 gallon


Water Tank Capacity
100 gallon
Holding Tank Capacity
40 gallon
Sleeping Capacity

Request a Quote

 US/US TERR.  Canada  Mexico  OTHER INTN'L LOC.
  • *First Name:
  • *Last Name:

  • *Address:
  • *City:
  • *State:
  • *ZIP Code:

  • *Phone:
  • Work Phone:
  • *Email:
  • Purchase Timeframe:

  • Additional Accessories:
  • Comments:
  • Extended Warranty:
    (Subject to Availability)
    Yes No

  • Where did you hear about us?

Have a trade in?

  • Trade in Mfg:
  • Trade in Model:
  • Trade in Year:
  • Trade in Miles/Hours:

  • Trade-In Accessories:

Contacting out of state dealer?

  • Reason for contacting:
  • Delivery Method:
  • Please check here if you would like to receive Email notifications of promotions, sales and special events.
Invalid Captcha. Please check the box.
To help us prevent spam, please check the box below.

*Price, if shown, does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). Final actual sales price will vary depending on options or accessories selected.
NOTE: Models with a price of "Request a Quote" are always included in a $0 search, regardless of actual value.
Youtube Facebook